Page 2
Kim Lighting • 16555 E. Gale Ave. • P.O. Box 60080 • City of Industry, CA 91716-0080 • 626/968-5666 • FAX 626/330-3861
Mini-Vault LTV761
Installation Instructions
9. Replace socket bracket assembly
and install lamp of type and watt-
age shown on fixture label. To
aim lamp, loosen vertical and
rotational locking screws. Aim
lamp bracket assembly to desired
orientation & tighten screws.
10. Make sure housing flange is
clean and free of all dirt and
debris. Replace lens, gasket
and lens ring. Secure with allen
head cap screws (5). Tighten
opposing screws progressively
and evenly to 20 inch/pounds,
(1.67 ft. lbs.).
Glass Lens
LAMP INFORMATION
Catalog
Lamp
Maximum
No.
Type
Watts
LTV761
PAR20
50
8. Make wire connections observing
polarity, i.e., green-to-ground,
white-to-common, and black-to-
voltage. Replace splice compart-
ment cover and tighten to 15
inch/pounds (1
J
ft. lbs.).
7. Pull field wires through conduit
system and into splice
compartment.
Vertical
Locking
Screw
Rotational
Locking
Screw
1
2
3
4
5
6. Remove two screws securing
splice compartment cover in
place and remove cover.
Allen Head
Screws (5)
3. To open fixture, remove five (5)
allen head cap screws, lens
frame, lens and gasket.
Locking Screw
4. Loosen vertical locking screw.
(Do Not Remove)
5. Gently compress legs of socket
bracket inward and remove
socket bracket assembly.
