manualshive.com logo in svg

Hubbell GAI-TRONICS RED ALERT 234WM-202, Manual, Page: 1 / 12

Share
Download
Hubbell GAI-TRONICS RED ALERT 234WM-202 Manual Download Page 1

Pub. 42004-308H 

 

G A I - T R O N I C S

®

 

A   H U B B E L L   C O M P A N Y  

234WM-202 

RED ALERT

®

 Elite Wall-Mount 

Communication Station

 

T

A B L E   O F  

C

O N T E N T S

 

GAI-TRONICS  3030 KUTZTOWN RD.  READING, PA  19605 USA 

610-777-1374  

◼

  800-492-1212  

◼

  Fax:  610-796-5954 

V

ISIT WWW

.

GAI

-

TRONICS

.

COM FOR PRODUCT LITERATURE AND MANUALS

 

Confidentiality Notice .....................................................................................................................1

 

General Information .......................................................................................................................1

 

Installation ......................................................................................................................................2

 

No. 84505-202 Wall-Mount Enclosure Installation .............................................................................. 2

 

Grounding Requirement ........................................................................................................................ 3

 

Tempered Glass Installation (Factory Installed) ................................................................................. 4

 

No. 84503-30x Panel Light Installation ................................................................................................. 5

 

Model 540-001 or 541-001 Strobe Installation ..................................................................................... 6

 

Emergency Telephone Installation ........................................................................................................ 7

 

Station Panel Light and Strobe Power Connections ............................................................................ 8

 

Maintenance ....................................................................................................................................9

 

Repairing Surface Damage to Powder-Coated Stations ................................................................9

 

Specifications ................................................................................................................................10

 

Approvals .......................................................................................................................................10

 

Summary of Contents for GAI-TRONICS RED ALERT 234WM-202













Reviews:

No comments