Pub. 42004-308H
234WM-202 RED ALERT
®
Elite Wall-Mount Communication Station
Page 2 of 10
P:\Standard IOMs - Current Release\42004 Instr. Manuals\42004-308H.docx
08/19
Installation
No. 84505-202 Wall-Mount Enclosure Installation
1.
Remove and save the two tamper-resistant screws at the top of the station (see Figure 1).
N
OTE
:
A GAI-Tronics Model 233-001 Security Screwdriver (sold separately) is required to remove
the tamper-resistant screws.
2.
Remove the wall-mounting assembly from the front panel assembly (see Figure 1).
3.
Detach the chain from the wall-mounting assembly(see Figure 2).
4.
Enlarge the conduit entry pilot hole(s) to be used for the station’s power cables (see Figure 3).
5.
Fasten the wall-mount enclosure to a wall or flat surface that can support at least 50 pounds, using
3/8-inch bolts (see Figure 2 for mounting hole dimensions and ADA height requirements).
Figure 1. Model 234WM-202 Wall-Mount Station Enclosure