Pub. 42004-456D
Division 1 VoIP Telephones
Page 8 of 18
P:\Standard IOMs - Current Release\42004 Instr. Manuals\42004-456D.docx
03/20
Mount the Telephone
N
OTE
:
The mounting surface must be able to support the 28-pound weight of the telephone.
Securely fasten the telephone enclosure to the mounting surface with 3/8-inch diameter steel mounting
bolts located on all four mounting feet. (see Figure 8)
•
Stainless steel hardware is recommended in outdoor applications.
•
The suggested mounting height is 48 inches to the bottom of the enclosure.
N
OTE
:
Refer to the Killark Installation, Operation, and Maintenance Data Sheet enclosed with the unit
for additional enclosure information.
Figure 8. Model 352 Series Division 1 VoIP Telephone Enclosure Mounting Details
Cable Entries
•
Seal all unused openings with proper fittings per local standards.
•
Use field wiring suitable for the ambient temperature.
•
All conduit NPT plugs (blanking elements) must be explosion-proof with a Type 4X rating (see
Figure 9).
