Pub. 42004-563A
E3 System Controllers
Page 13 of 16
P:\Standard IOMs - Current Release\42004 Instr. Manuals\42004-563A.docx
01/21
Aux Audio 2
A
UX
A
UDIO
2
provides termination for auxiliary audio input two, auxiliary audio input three, and the
auxiliary audio output. Install a 10-conductor IDC ribbon cable between the
A
UX
A
UDIO
2
port on the
controller (see Figure 3) and the 10-conductor IDC interface PCBA. Refer to the table below for the
termination points:
Table 5. Auxiliary Audio Two Interface Pin-out
Description
Conductor
Aux Audio Input #2 (+)
1
Aux Audio Input #2 (−)
2
Chassis GND
3
Aux Audio Input #3 (+)
4
Aux Audio Input #3 (−)
5
Chassis GND
6
Aux Audio Out (L1)
7
Aux Audio Out (L2)
8
Chassis GND
9
NC
10
Operation
Each E3 system controller receives a custom configuration for its specific application via the
Elemec3
Console and
Elemec3
Portal applications. Please refer to the
Elemec3
system manual included with each
system for information on an individual system’s operation.
The
E3
system controller’s front panel contains a rotary key switch, three LEDs and a USB port (
USB
port
not functional in this product
).
The E3 system controller requires an
Elemec3
Console database version 2.0 or later. Upgrade existing
databases when opening them in newer versions of the
Elemec3
Console application. Refer to Publication
42004-550, Elemec3 Console Manual—Version 3.0 for additional details (see the Reference
Documentation section).
The
auto alarm inhibit
key switch prevents the activation of previously configured inputs.
Status LEDs
The three front panel LEDs operate according to the following table:
