17
©2018 Hubbell Incorporated | Chance
®
Capstan Hoist Operating Instructions
Common Hoist Applications
Pulling Transformers and Poles
Using the portable hoist and the fall line from a set of blocks, transformers, and poles can be pulled
from the truck to rear property lines. This method offers several advantages over using truck winch
power. Rigging with the portable hoist also eliminates the hazard of tripping over and the obstacle of
working around the return rope to the truck.
Raising and Lowering Transformers, Setting Poles
Using the portable hoist, transformers can easily be raised and lowered and replacement poles
easily and safely set. The hoist is particularly valuable for private property work since it eliminates
the necessity of a worker to relay signals between the workman on the pole and the truck parked in
the street. Use of the hoist also allows all the workers to be in the immediate job area for maximum
control over all hoisting or lowering operations.
Pulling Pole Stubs
Pulling pole stubs located in private property can be facilitated by using the portable hoist. To lessen
the required pulling force, the ground should be broken loose all around the stub before attempting
to pull it.
Sagging Wire (De-energized and grounded)
Using the hoist, a handline and come-along, wire can be pulled in and up to sag. This method is
particularly useful in new subdivision work for putting up and sagging secondaries.
Communication Tower Work
Using the hoist, antenna equipment can be efficiently lifted into position on communication
structures. 1,000 lb Capstan Hoists can be easily maneuvered into position while anchored to a
vehicle when used with the Swivel Base Truck Mount, model PSC3081563.
Pulling Wire
The hoist can be used for some cable pulling jobs. It is particularly handy for pulling cable to pad-
mounted transformers located on private property.
Transmission Tower Work
Using the hoist, large crossarms, strings of disc insulators, and tools can be pulled up onto steel
transmission towers. The hoist also can be used to lower and raise conductors (de-energized and
grounded) so that splices, patch rods, repair of damaged conductor sections, and other mid-span
work can be performed on the ground.
