Hubbel GAI-Tronics 298, Manual

Page: 12 / 27

Page
12 of 26
Model 298 ADA-Compliant Emergency Telephone Pub. 42004-304A
f:\standard ioms - current release\42004 instr. manuals\42004-304a.doc
06/02
Feature
Key
Sequence
Description Default
Outside Line
Auto-dial
Number 1 D *# DD ... *1 Assigns a telephone number to the auto-dial button. D
represents the outside line access number. *# forces the unit
to wait for a second dial tone. DD... represents the telephone
number. Up to 20 digits can be programmed (including the *#
digits).
For Example : If you must dial 9 to access an outside line, and
you want to assign the emergency number 911 to the push-
button, enter 9*#911*1 .
To store * or # , (such as for speed dialing), enter these digits
twice in succession.
Note : If the auto-dial number was previously cleared (such as
*1 was entered), enter the auto-dial sequence twice.
None
Outside Line
Auto-dial
Number 2 D *# DD ... *2 Assigns an alternate telephone number to the auto-dial button
when the
KEY SWITCH
is enabled. D represents the outside
line access number. *# forces the unit to wait for a second dial
tone. DD... represents the telephone number. Up to 20 digits
can be programmed (including the *# digits).
For Example : If you must dial 9 to access an outside line, and
you want to assign the number 555 to the push-button, enter
9*#555*2 .
To store * or # , (such as for speed dialing), enter these digits
twice in succession.
Note : If the auto-dial number was previously cleared (such as
*2
was entered), enter the auto-dial sequence twice.
None
Primary Dial
Tone Delay # 1 0 N N The dial tone delay is the amount of time the unit waits for a
dial tone before auto-dialing the telephone number. (00
[infinite]; 01-15 seconds)
For Example : To wait five seconds for a dial tone, enter
# 1 0
0 5
.
00 (Infinite)
Secondary Dial
Tone Delay # 1 1 N N This feature is only used if you must dial
9
to access an
outside line. It determines the amount of time (00-15 seconds)
the telephone waits for a second dial tone. The first
programming step indicated you must program
9*#
and the
number you want the auto-dial to access. This programming
parameter allows you to choose the amount of time the
telephone waits after encountering
#
before dialing the auto-
dial number.
For Example : To wait ten seconds for the second dial tone,
enter
# 1 1 1 0
.
00 (0
Seconds)