MODERN AMERICAN BLACKSMITHS | FINE, HAND CRAFTED LIGHTING
CASTLETON, VERMONT USA | HUBBARDTONFORGE.COM
44708
ASSEMBLY & INSTALLATION INSTRUCTIONS
Shard Outdoor Sconce XL 302518
B423
1.
Carefully unpack the fixture (A) from the carton.
2.
Plate assembly (H) is shipped installed. Remove plate by removing
the two plate screws (I) (Figure 1). Remove mounting bracket (B).
3.
Using two machine screws (not provided) attach mounting bracket (B)
to the electrical box (Figure 2).
Note:
A new electric box comes with screws. When replacing a fixture,
retain the existing screws for use with the new fixture.
4.
Using the ground screw (E) and the cupped washer (F) found in kit
bag, secure a pigtail lead to the mounting bracket (B).
5.
Hold the fixture (A) close to the mounting bracket (B) and using suit
-
able wire connectors (not provided), connect fixture wires to supply
wire (white to white and black to black). Connect all ground wires
(bare copper or green to bare copper or green).
6.
Apply a generous bead of a suitable caulking material (not provided)
to caulking lip (G) on the fixture. Caulk should be applied around the
entire perimeter of the backplate (Figure 3).
7.
Carefully tuck all wires behind fixture and inside the mounting bracket
(B). Place fixture firmly onto bracket and fasten with two #8 screws
(C) and rubber washers (D) on top.
Note:
Be sure no wires are pinched between the wall and fixture.
8. Install the two #8 screws (C) in bottom of fixture.
To Install Fixture
(Figures 1, 2 & 3, following pages)
CAUTION:
FAILURE TO INSTALL THIS FIXTURE PROPERLY MAY RESULT IN SERIOUS PERSONAL INJURY OR DEATH
AND PROPERTY DAMAGE.
We recommend installation by a licensed electrician. This product must be installed in accordance
with applicable installation code(s), by a person familiar with the construction and operation of the product and the hazards involved.*
Caution:
Do not exceed maximum wattage noted on fixture. Use only recommended bulbs with fixture.
Please Note: After installation extra hardware and accessories are possible; our kits are used on multiple products and options.
CAUTION:
BE SURE POWER IS OFF AT THE MAIN BREAKER BOX PRIOR TO INSTALLATION.
CAUTION:
MAKE SURE WIRE CONNECTORS ARE TWISTED ON
SECURELY AND NO BARE WIRES ARE EXPOSED.
3 OF 5
H
I
A
(Figure 1)
