1
I. Overview
1. Purpose
HZ5372 high current generator (referred to as the current booster) is a test equipment
developed by our company. It combines the advantages of similar products at home and
abroad. It adopts numerical control technology and has strong anti-interference ability.
Compared with the previous generation of current booster, Due to the use of low-power,
large-capacity, self-coupling voltage regulators and high-permeability iron cores, the
converter has the advantages of large output power, small size, and light weight. It is
mainly used for primary bus protection and various current transformer transformation
ratio test items. It is widely used in the scientific research, production and electrical test
sites of electric power, railway, petrochemical, metallurgy and mining enterprises.
2. Performance characteristics
◆
Use beautiful and generous PVC panel
◆
The operation time of the test equipment can be synchronized
◆
Automatic recognition of normally open and normally closed contacts
◆
Several calibrations can be connected in series at the same time to improve work
efficiency
◆
Directly display the test values of primary current and secondary current, which is
convenient for test observation and recording.
◆
High measurement accuracy 0.5 level
◆
High power, small size, strong load capacity
Small size and light weight, the volume is only 30% to 70% of similar products, and it is
very convenient to carry.
3. Operational aspects
(1) After the wiring is completed, check it again to see if there is a wiring error and whether
the connector is in good contact.
(2) During the test, if there is any abnormal phenomenon such as sparking or no display
when starting up, turn off the power immediately and recheck the wiring.
