10
Please input carefully according to the transformer nameplate while inputting information
as all information is automatically saved together with the test result and incorrect input
may affect the contents of the report.
Sweeping Mode Confirmation and Modification
1
、
Selection of Sweeping Mode
Click “Stop Frequency”
to select test stop frequency and then the system will
automatically set parameters to the set parameters according to the set sweeping
parameters, including start frequency, sweeping mode, and sweeping point number. To
adjust, click the parameter label in area A to switch automatically (the label automatically
turns green when the mouse pointer moves to a changeable label).
2
、
Change of Default Information
To readjust the default setting information, click “Stop Frequency”
key with right
mouse button to let the function menu pop up. The information setting window (as shown
in the figure below) will pop up when “setting” is selected, where you may adjust the
default sweeping information and restart the software after adjustment. Then the system
will test with the adjusted default information.
