6
Press Cycle key the cursor can move among
Current select
,
Phase division
,
Winding
temp
,
Convert temp
,
Data query
,
Clock modify
,
Parameters
,etc. Press select key
can circle select above 7 menus option. when the cursor at Winding temp ,press start key
the cursor will roll between 3 data bits ,the
select
key can circle display data between
0~9.the Start up key can start any options besides Winding temp.
3. Move the cursor to data query menu at the boot state, then press select key enter to the
data query ,press select or start up key to turn pages querying.
4. After selecting the current, press START UP to start the test; When press START UP,
few seconds later, it will display "CHARGING", when it displays "TESTING" that means
the “CHARGING” has been completed. Few seconds after accessing the TEST STATUS it
will show the measured resistance values.
5. After the test: press "RESET" back to boot interface, discharge, alarm,and after the
discharge alarm, please be sure wait for about 10 seconds, re-connection, proceed the
next test or unplug the test cable and end the measurement.
