C
Using Commands to Enable VPT300
Tracking in Idle State
Step 1
Enable Telnet or SSH login.
1. Log in to the web interface of the TE endpoint. For details, see
to the Web Interface of an Endpoint
2. Choose
System Settings
>
Security
.
3. In the
SSH/Telnet
area, set
Telnet login
or
SSH
to
Allow
, as shown in
Figure C-1
Enabling Telnet or SSH login
4. Click
Save
.
Step 2
Log in to the TE endpoint using Telnet or SSH.
Step 3
Enter the user name
debug
and press
Enter
.
Step 4
Enter the password (
Change_Me
by default) and press
Enter
. The command-line
interface is displayed.
Step 5
Enter
ui config set common.VptCamAllowCtrl
and press
Enter
.
Step 6
Enter
1
and press
Enter
.
Step 7
Enter
ui config save
and press
Enter
.
VPT300 Intelligent Camera
Installation and Commissioning Guide
（
Single-
VPT300
）
C Using Commands to Enable VPT300 Tracking in
Idle State
Issue 04 (2020-02-11)
Copyright © Huawei Technologies Co., Ltd.
41
