Figure A-5
Calibration calculation
NO TICE
● The calibration calculation takes a maximum of 3 minutes. Wait for the
calibration result.
● If the calibration fails, a red box blinks. In this case, perform the preceding steps
again.
Step 10
Run the
mnt reboot
command or press the power switch at the rear of the
VPT300 to restart the VPT300 for the calibration to take effect.
shows
the position of the power switch.
VPT300 Intelligent Camera
Installation and Commissioning Guide
（
Single-
VPT300
）
A Calibrating the Camera
Issue 04 (2020-02-11)
Copyright © Huawei Technologies Co., Ltd.
33
