Figure 4-5
Installing the server
3.
When the two mounting ears of the server come into contact with the mounting bars on
the cabinet, tighten their captive screws to secure the server. See (2) in
.
Step 4
Connect power cables to the server and power on the server. Connect a network cable, a VGA
cable, or USB devices as required.
----End
4.4.2 Installing with Adjustable Guide Rails
Adjustable guide rails are for a cabinet with a depth of 543.5 mm to 848.5 mm (21.40 in. to
33.41 in.) between the front and rear mounting bars.
The 2288H V5 servers are not stackable when adjustable guide rails are used.
Step 1
Install the adjustable guide rails.
1.
Position a guide rail horizontally in contact with the mounting bars and hook it onto the
cabinet. See (1) in
.
NOTE
The three holes in each mounting ear of a guide rail should be within 1U boundary lines.
2288H V5 Server
User Guide
4 Setup
Issue 04 (2018-09-04)
Copyright © Huawei Technologies Co., Ltd.
72
