Figure 3-3
Removing the server
2.
Pull out the server along the guide rails away from the cabinet. See (2) in
.
3.
Place the removed server on an ESD platform.
Step 5
Loosen the M6 screw from the lowest square hole at the rear of a guide rail. See (1) in
Step 6
Remove the two plugs from the middle square holes on both ends. See (2) in
.
Step 7
Remove the guide rail from the cabinet.
1.
Tilt the guide rail to unhook it from the front mounting bar. See (3) in
2.
Retract the guide rail. See (4) in
.
3.
Rilt the guide rail to unhook it from the rear mounting bar, and remove it from the
cabinet.
2288H V5 Server
User Guide
3 Basic Operations
Issue 04 (2018-09-04)
Copyright © Huawei Technologies Co., Ltd.
45