Step 1
Wear an ESD wrist strap. For details, see
12 Preventing Electrostatic Discharge
.
Step 2
Power off the server. For details, see
Step 3
Remove the power cables. For details, see
3.7 Removing Cables from a PSU
.
Step 4
Remove the server. For details, see
3.3 Removing the Server and Guide Rails
.
Step 5
Remove the chassis cover. For details, see
3.4 Removing the Chassis Cover
.
Step 6
Take a spare USB flash drive out of its ESD bag.
Step 7
Determine the position of the USB port on the mainboard. See
Figure 5-31
USB port position
Step 8
Insert the USB flash drive into the USB port. See
.
Figure 5-32
Installing the USB flash drive
2288H V5 Server
User Guide
5 Optional Part Installation
Issue 04 (2018-09-04)
Copyright © Huawei Technologies Co., Ltd.
139