manualshive.com logo in svg

Huawei V100R005, User Manual, Page: 121 / 294

Share
Download
Huawei V100R005 User Manual Download Page 121

5

 Optional Part Installation

NOTE

l

Before performing operations in this chapter, make sure that optional parts to be installed are
available and compatible. Use the 

Huawei Server Compatibility Checker

 to check parts

compatibility.

l

After parts replacement, upgrade the software, firmware, and CPLDs of the new components to
either the version in the customer environment (recommended) or to the latest version. For details,
see the 

Huawei Rack Server Upgrade Guide (iBMC)

 and 

Huawei Server Firmware Upgrade

Guide

.

l

After parts replacement, restore component configurations (including BMC, BIOS, and RAID) on
the customer live network.

5.1 Precautions

5.2 Front Bezel (Optional)

5.3 Drive

5.4 PSU

5.5 PCIe Card on a Riser Card

5.6 DVD Drive

5.7 Built-in USB Flash Drive

5.8 Screw-in RAID Controller Card

5.9 Avago SAS3004iMR RAID Controller Card

5.10 M.2 SSD Module

5.11 Supercapacitor

5.12 CPU

5.13 DIMM

5.14 TPM/TCM

5.15 Flexible NIC

5.16 Rear Drive Module

5.17 Left Mounting Ear

2288H V5 Server
User Guide

5 Optional Part Installation

Issue 04 (2018-09-04)

Copyright © Huawei Technologies Co., Ltd.

112

Summary of Contents for V100R005







































































































































































































































































































Reviews:

No comments