If there are multiple boot devices of the same type, you can configure the boot sequence. The
following uses PXE as an example. For details about setting other types of devices as boot
options, see the
Huawei Server Purley Platform BIOS Parameter Reference
Step 1
Choose
Advanced
>
PXE Configuration
, and press
Enter
.
NOTE
l
The
PXE Configuration
screen provides configuration of up to four on-board network ports. The
default value is
Enabled
for PXE1, and PXE3, and
Disabled
for other network ports.
l
The PXE settings for the I/O network card are also displayed.
The
PXE Configuration
screen is displayed, as shown in
.
Figure 4-40
PXE Configuration
Step 2
Select the network port to be configured and press
Enter
.
Step 3
Select
Enabled
in the displayed dialog box, and press
Enter
.
NOTE
To disable a network port, select
Disabled
and press
Enter
.
----End
Set the BIOS password.
Step 1
Select
Security
.
The
Security
screen is displayed, as shown in
.
2288H V5 Server
User Guide
4 Setup
Issue 04 (2018-09-04)
Copyright © Huawei Technologies Co., Ltd.
109