Huawei V100R002C01 User Manual Download Page 20

Page: 20 / 122

Only trained and qualified personnel can perform hoisting operations.

Before hoisting heavy objects, check that the hoisting tools are complete and in good
condition.

Before hoisting heavy objects, ensure that the hoisting tools are fixed to a secure object or
wall with good weight capacity.

Issue orders with short and explicit words to avoid misoperations.

Ensure that the angle formed by two cables is not larger than 90 degrees. See

Figure 1-1

Hoisting heavy objects

1.8.2 Using Ladders

Checking a Ladder

Before using a ladder, check whether the ladder is damaged. Only the ladder in good
condition can be used.

Before using a ladder, you should know the maximum weight capacity of the ladder. Avoid
overweighing the ladder.

Placing a Ladder

The recommended gradient of ladders is 75 degrees. You can measure the gradient of the ladder
with an angle square or your arms, shown in

Figure 1-2

. When using a ladder, ensure that the

Tecal ES3000 High Performance PCIe SSD Card
User Guide

1 Security

Issue 04 (2014-03-05)

Huawei Proprietary and Confidential

Summary of Contents for V100R002C01



























































































































Search results

Summary of Contents for V100R002C01

Reviews:

Related manuals for V100R002C01

Brands by name

Popular brands

Huawei V100R002C01, User Manual

Search results

Summary of Contents for V100R002C01

Reviews:

Related manuals for V100R002C01

Brands by name

Popular brands