Huawei TP3106 Commissioning Manual Download Page 12

Page: 12 / 202

Deployment Preparation

2.1 Planning

To complete the deployment, ensure that all the tasks listed in

completed in order and all verification items are passed.

Figure 2-1

Deployment procedure

Table 2-1

Deployment tasks

Task

Description

Remarks

Pre-unpacking check

Check the equipment cases.

XX cases in total. If any
abnormalities exist, confirm
the issue with the logistics
personnel.

Unpack cases and cartons

Unpack the cases and
cartons, and check the goods
inside.

There are 17 boxes
containing mechanical parts.
If any abnormalities exist,
confirm the issue with the
supply chain.

Label cables

Sort and label the cables.

Sort and label the cables
according to the system
connection diagrams.

HUAWEI TP3106&TP3118&TP3118S
Commissioning Guide

2 Deployment Preparation

Issue 01 (2015-02-12)

Huawei Proprietary and Confidential

Summary of Contents for TP3106











































































































































































































Search results

Summary of Contents for TP3106

Reviews:

Related manuals for TP3106

Brands by name

Popular brands

Huawei TP3106, Commissioning Manual

Search results

Summary of Contents for TP3106

Reviews:

Related manuals for TP3106

Brands by name

Popular brands