Huawei TaiShan 200 23280 User Manual Download Page 149

Page: 149 / 191

Figure 8-19 PuTTY Configuration - Session

Step 6 Set Close window on exit to Only on clean exit, as shown in

Figure 8-19

Set Saved Sessions and click Save. Next time you can simply double-click the

saved settings under Saved Sessions to log in to the server.

Step 7 Click Open.

The PuTTY window is displayed.

Step 8 Enter the user name and password.

If the login is successful, the server host name is displayed on the left of the

prompt.

----End

8.5 Logging In to the Server over a Network Port Using

PuTTY

The login method described in this chapter applies to components that support

SSH access, for example, iBMC and OS.

Use PuTTY to remotely log in to the server over a local area network (LAN) and

configure and maintain the server.

TaiShan 200 Server (Model 2280)

User Guide

8 Common Operations (iBMC V250 or Later)

Issue 09 (2021-01-12)

141

Summary of Contents for TaiShan 200 23280
































































































































































































Search results

Summary of Contents for TaiShan 200 23280

Reviews:

Related manuals for TaiShan 200 23280

Brands by name

Popular brands

Huawei TaiShan 200 23280, User Manual

Search results

Summary of Contents for TaiShan 200 23280

Reviews:

Related manuals for TaiShan 200 23280

Brands by name

Popular brands