Huawei SUN2000-60KTL-M0 User Manual Download Page 78

Page: 78 / 127

Man-Machine Interactions

7.1 Operations with a USB Flash Drive

USB flash drives of SanDisk, Netac, or Kingston are supported. Other USB flash

drives may not be identified because they are not tested for compatibility.

NO TE

Delete the script file immediately after use to reduce information disclosure risks.

7.1.1 Exporting Configurations

Procedure

1. Click Local maintenance script on the app to generate a boot script file, see

the

FusionSolar APP and SUN2000 APP User Manual

2. Import the boot script file to a PC.

(Optional) The boot script file can be opened as a .txt file.

Figure 7-1 Boot script file

SUN2000-(60KTL, 65KTL)-M0

User Manual (Mexico Edition)

7 Man-Machine Interactions

Issue 06 (2020-10-12)

Summary of Contents for SUN2000-60KTL-M0
































































































































Search results

Summary of Contents for SUN2000-60KTL-M0

Reviews:

Related manuals for SUN2000-60KTL-M0

Brands by name

Popular brands

Huawei SUN2000-60KTL-M0, User Manual

Search results

Summary of Contents for SUN2000-60KTL-M0

Reviews:

Related manuals for SUN2000-60KTL-M0

Brands by name

Popular brands