Huawei SUN2000-30KTL-A User Manual Download Page 7 | Manualshive

Page: 7 / 108

background image

SUN2000-(30KTL-A, 33KTL, 40KTL)
User Manual

1 Safety Precautions

Issue 04 (2016-06-20)

Huawei Proprietary and Confidential

Copyright © Huawei Technologies Co., Ltd.

1

1

Safety Precautions

Personnel Requirements



Only qualified and trained electrical technicians are allowed to install and operate the
inverter.



Operators should understand the components and functioning of a grid-tied PV power
system and be familiar with relevant local standards.

Read this document thoroughly before operations. Huawei shall not be liable for any
consequence caused by violation of the storage, transportation, installation, and operation
regulations specified in this document.

Sign Protection



Do not tamper with any warning signs on the inverter enclosure because these signs
contain important information about safe operation.



Do not tamper with the nameplate on the inverter enclosure because it contains important
product information.



Do not remove the warranty label from the inverter enclosure. Otherwise, product
warranty will be forfeited.

Installation



Ensure that the inverter is not connected to a power supply and is not powered on before
starting installation.



Ensure that there are no objects within 200 mm, 200 mm, 500 mm, 600 mm, and 1000
mm of the left, right, top, bottom, and front of the inverter, respectively. This is to allow
sufficient space for installation and heat dissipation. If you have any questions about the
distance, consult the local technical support engineers.



Ensure that the inverter is installed in a well ventilated environment.



Ensure that the inverter heat sinks are free from blockage.

«
...
5
6
7
8
9
...
»

Summary of Contents for SUN2000-30KTL-A













































































































Reviews:

No comments

Related manuals for SUN2000-30KTL-A

Brand: NEC Pages: 2

VIP-5000 Series

Brand: Daktronics Pages: 6

Brand: Daikin Pages: 255

Brand: YASKAWA Pages: 44

Brand: Z3 Technology Pages: 27

Brand: Thinkpower Pages: 30

Brand: April Music Pages: 11

Brand: M-system Pages: 5

Brand: 3onedata Pages: 7

ECO Inverter+ 25

Brand: Oilon Pages: 58

Brand: Zamp Solar Pages: 9

Brand: PRO SIGNAL Pages: 2

Brand: Hoymiles Pages: 29

Brand: StarTech.com Pages: 12

EASI ATM IND2x2 Series

Brand: Teleste Pages: 28

Brand: Black Iris For Telecom & Technology Pages: 14

Omnitron iConverter GX/TM2

Brand: Omnitron Systems Technology Pages: 2

Brand: Fronius Pages: 92

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands