Huawei SUN2000-15KTL-50KTL-M3 Series User Manual Download Page 56

Page: 56 / 70

Replacing SUN2000-(15KTL-50KTL) Series with
SUN2000-(15KTL-50KTL)-M3 Series
User Manual

6 Electrical Connections

Issue 01 (2021-04-05)



Ensure that the PE cable is securely connected. Otherwise, electric shocks may occur.



Do not connect the neutral wire to the enclosure as a PE cable. Otherwise, electric shocks
may occur.



The PE point at the AC output port is used only as a PE equipotential point, and cannot substitute for
the PE point on the enclosure.



It is recommended that silica gel or paint be used around the ground terminal after the PE cable is
connected.

Procedure

Step 1

Connect the PE cable.

Figure 6-1

Connecting the PE Cable

(1) Standby protection ground point

----End

6.2.2 Installing the AC Output Power Cable

Precautions

An AC switch must be installed on the AC side of the SUN2000 to ensure that the SUN2000
can be safely disconnected from the power grid.

Summary of Contents for SUN2000-15KTL-50KTL-M3 Series







































































Search results

Summary of Contents for SUN2000-15KTL-50KTL-M3 Series

Reviews:

Related manuals for SUN2000-15KTL-50KTL-M3 Series

Brands by name

Popular brands

Huawei SUN2000-15KTL-50KTL-M3 Series, User Manual

Search results

Summary of Contents for SUN2000-15KTL-50KTL-M3 Series

Reviews:

Related manuals for SUN2000-15KTL-50KTL-M3 Series

Brands by name

Popular brands