Huawei SUN2000-10KTLM1 User Manual Download Page 31

Page: 31 / 124

4.4 Moving the SUN2000

Procedure

Step 1 Two persons are required to move the SUN2000 with one person on both sides.

Lift the SUN2000 from the packing case and move it to the specified installation

position.

CA UTION

● Move the SUN2000 with care to prevent device damage and personal injury.
● Do not use the wiring terminals and ports at the bottom to support any weight

of the SUN2000.

● Place a foam pad or cardboard under the SUN2000 to protect the SUN2000

enclosure from damage.

Figure 4-6 Moving the SUN2000

----End

4.5 Installing the Mounting Bracket

Installation Precautions

Figure 4-7

shows the dimensions of installation holes on the SUN2000.

Figure 4-7 Mounting bracket dimensions

SUN2000-(3KTL-10KTL)-M1

User Manual

4 Installation

Issue 02 (2020-11-20)

Summary of Contents for SUN2000-10KTLM1





























































































































Search results

Summary of Contents for SUN2000-10KTLM1

Reviews:

Related manuals for SUN2000-10KTLM1

Brands by name

Popular brands

Huawei SUN2000-10KTLM1, User Manual

Search results

Summary of Contents for SUN2000-10KTLM1

Reviews:

Related manuals for SUN2000-10KTLM1

Brands by name

Popular brands