manualshive.com logo in svg

Huawei SmartAX MT883, User Manual

Share
Download
Huawei SmartAX MT883 User Manual Download Page 18

 

13 

6 

Appendix 

6.1 

Indicators 

Indicator 

Status 

Description 

On 

The MT883 is powered on. 

POWER 

Off 

The MT883 is powered off. 

Blinking

The MT883 is being activated. 

On 

The MT883 is activated. 

ADSL 

Off 

The MT883 is powered off. 

Blinking

Data is being transmitted through the Ethernet 
interface. 

On 

The Ethernet connection is set up. 

LAN 

Off 

The Ethernet connection is not set up. 

 

6.2 

Interfaces and Buttons 

Interface/Butto
n 

Description 

POWER 

It is used to connect to the USB port on the computer. The 
power is supplied to the MT883 through the USB port on the 
computer. 

LAN 

It is used to connect to the Ethernet interface on the computer.

RESET 

You can restore the default settings by pressing this button. 

Note: After you restore the default settings, the customized data 
will be lost. Therefore, use this function with caution. 

ADSL 

It is used to connect to the MODEM interface on the splitter. 

 

It is the power button on top of the MT883 and is used to power 
on or power off the MT883. 

Summary of Contents for SmartAX MT883





















Reviews:

No comments

Brands by name

Popular brands

Load more brands