Huawei SmartACBox, Quick Manual

Page: 22 / 30

21
Category Status (Blinking slowly: On for 1s and then Off for 1s;
Blinking fast: On for 0.2s and then Off for 0.2s) Description
Run
indication LED1 LED2 N/A
Steady green Steady green The solar inverter operates in
the grid-tied mode.
Blinking green at long
intervals Off The DC is on and the AC is
off.
Blinking green at long
intervals Blinking green at long intervals Both DC and AC are on, and
the solar inverter is not
connected to the power grid.
Off Off The DC is off, and the AC
may be energized (Ensure
that the external AC switch is
OFF).
Steady red Steady red Fault
Communic
ation
indication LED3 N/A
Blinking green at short intervals The solar inverter is in
communication.
Off No communication
Preparations and WebUI Login
1
System Commissioning (SmartLogger1000A WebUI)
1. Connect the network cable between the network port on the PC and the ETH port on the
SmartLogger1000A.
2. Set the IP addresses of the PC and SmartLogger1000A in the same network segment.
Item
SmartLogger Default Value Example PC Setting
IP address 192.168.0.10 192.168.0.11
Subnet mask 255.255.255.0 255.255.255.0
Default gateway 192.168.0.1 192.168.0.1
1. Use the SmartLogger1000A to set parameters for the SUN2000-4.95KTL-JPL0.
2. Operating system: Windows 7 or later versions
3. Browser: Chrome 52, Firefox 58, Internet Explorer 9, or their later versions
4. The WebUI snapshots are for reference only, and the actual display prevails.