Huawei RRU3804 User Manual Download Page 78

Page: 78 / 90

Instruments

Multimeter, 500 V megohmmeter (for insulation resistance), BER tester,
optical power meter

NOTE

The instruments must be checked and certified.

3.4 Installing the RRU3804 on the Ground or Rooftop

When the RRU3804 needs to be installed on the ground or rooftop, it supports one-module, two-
module centralized, and three-module centralized installation modes.

3.4.1 Installing a Single RRU3804

This describes how to install a single RRU3804 module and its mounting plate. The single
RRU3804 can be installed on a metal pole or wall.

3.4.2 Installing Two RRU3804s

This describes how to install two RRU3804 modules and their mounting plates. The two
RRU3804s can be installed on a metal pole or wall.

3.4.3 Installing Three RRU3804s

This describes how to install three RRU3804 modules and their mounting plates. The three
RRU3804s can be installed on a metal pole or wall.

3.4.1 Installing a Single RRU3804

This describes how to install a single RRU3804 module and its mounting plate. The single
RRU3804 can be installed on a metal pole or wall.

Procedure

Step 1

Install the mounting plate of the RRU3804. The operation varies with the installation mode.

Condition

Action

The RRU3804 needs to be installed on a
metal pole.

Install the mounting plate of the single
RRU3804 on the metal pole

The RRU3804 needs to be installed on a wall.

Install the mounting plate of the single
RRU3804 on the wall

Step 2

Install the single RRU3804 module. For details, refer to

3.4.1.3 Installing the Single RRU3804

Module

----End

Installing the Mounting Plate of the Single RRU3804 on the Metal Pole

This describes how to install the mounting plate on the metal pole.

3 Installing RRU3804 and SRXU Hardware

RRU3804

User Guide

3-14

Huawei Technologies Proprietary

Issue 01 (2007-11-29)

Summary of Contents for RRU3804



























































































Search results

Summary of Contents for RRU3804

Reviews:

Related manuals for RRU3804

Brands by name

Popular brands

Huawei RRU3804, User Manual

Search results

Summary of Contents for RRU3804

Reviews:

Related manuals for RRU3804

Brands by name

Popular brands