9
Installing the Floor Stand
07
4 x M6 x 16
Assemble the bottom bar with screws.
8 x M6 x 16
Insert the left and right columns into the bottom bar, and ensure
that there is no gap at the joints. Then tighten the screws.
500 mm
500 mm
NOTE
1. Install the floor stand components in the sequence numbered on boxes. For example,
install the bottom bar and columns in box
01
, then display mount bar in box
02
.
2. The screws must be pre-installed and then tightened. (Torque: 28 ±10% kgf.cm)
Left column
Right column
1
2
CAUTION
A heavy device cannot be moved easily after installation.
Therefore, determine the installation position in advance. It
is recommended that the column be 500 mm away from the
wall or any object protruding from it.
