2
2
Installing the Charger
Checking Before Installation
2.1
Before unpacking the charger, check the outer packing materials for damage, such as holes and cracks, and check the charger m odel. If any
damage is found or the charger model is not what you require, do not unpack the charger but contact the supplier as soon as possible.
Mounting Hole Sizes (unit: mm)
Checking Outer Packing Materials
Checking Deliverables
After unpacking the charger, check whether the deliverables are
intact and complete. If any damage is found or any component is
missing, contact your supplier.
N/A
N/A
N/A
Tools
Installing the Charger
2.2
The charger can be installed horizontally, sidewards, or vertically (with the panel at the bottom). If side or vertical installation is adopted,
ensure that mechanical parts are designed to avoid interference. The installation mode can be selected according to the actual situation.
Horizontal installation is recommended and vertical installation is not recommended.
Horizontal Installation (Recommended)
1. (Optional) Determine whether to
install the mounting ear based on the
site requirement.
2. Slowly push the charger into the slot.
3. Tighten the charger.
4. After the installation is complete,
seal the cable holes of the cabinet.
Side Installation
Vertical Installation
(Not Recommended)
Vertical installation is
not recommended
because doing so
will cause
maintenance
difficulty as you will
be unable to locally
check whether the
charger is running
(the indicators are
invisible because the
panel faces
downwards).
