Huawei R2561 User Manual Download

Page: 9 / 64

IDU R2561
User Guide

2 Introduction

Issue 01 (2019-02-28)

2.5.2 Connecting the Cable

Step 1

Physical connection as following

Connect the Ethernet cable to the RJ45 ports of IDU R2561 and ODU.

Connect the Ethernet cable from the computer to one of the IDU R2561's Ethernet Ports.

Connect the supplied power adapter to the IDU R2561. The PWR LED shines a steady
green when device ready.

Mounting the Device.

Step 2

Connect to the Internet

Physical connection is as following (Refer to Installing Device Instruction).

Connect IDU R2561 (WAN) and ODU(RJ45) via Ethernet cable.

Use power adapter to connect IDU R2561 (Power)

Connect IDU R2561 (ETHERNET PORTS) and PC via Ethernet cable.

PC will get default IP 192.168.1.xxx (xxx: 2-254). Open a web browser and go to
192.168.1.1.

Use

ONLY

the indoor router which supplied with the IDU R2561. Otherwise,

Device may be damaged.

----End

Summary of Contents for R2561

































































Search results

Summary of Contents for R2561

Reviews:

Related manuals for R2561

Brands by name

Popular brands

Huawei R2561, User Manual

Search results

Summary of Contents for R2561

Reviews:

Related manuals for R2561

Brands by name

Popular brands