Command Manual – Cluster
Quidway S3100 Series Ethernet Switches-Release 1510
Chapter 1 HGMPv2 Configuration Commands
Huawei Technologies Proprietary
1-20
Note:
To protect the unused sockets against malicious attacks and improve the switch
security, S3900 series Ethernet switches provide the following function:
z
When the cluster function is enabled, socket UDP 40000 used by the cluster is
enabled;
z
When the cluster function is disabled, socket UDP 40000 is disabled at the same
time.
This function is implemented on the command switch in the following scenarios:
z
Use the
build
command or the
auto-build
command to create a cluster and enable
socket UDP 40000 used by the cluster at the same time.
z
Use the
undo build
command or the
undo cluster enable
command to remove a
cluster and disable socket UDP 40000 at the same time.
This function is implemented on the member switch in the following scenarios:
z
Use the
add
-
member
command on the management device to add a candidate
switch into the cluster and enable socket UDP 40000 of the new member.
z
Use the
auto-build
command on the management device to add a candidate switch
into the cluster and enable socket UDP 40000 of the new member.
z
Use the
administrator-address
command on the current switch to enable socket
UDP 40000.
z
Use the
delete-member
command on the management device to delete a cluster
member and disable socket UDP 40000 of the member switch.
z
Use the
undo build
command on the management device to delete a cluster and
disable sockets UDP 40000 of all the cluster members.
z
Use the
undo administrator-address
command on a member switch to disable
socket UDP 40000 of the member switch.
1.3.5
cluster
Syntax
cluster
View
System view
Parameter
None
Description
Use the
cluster
command to enter cluster
view.
