r
1
Installing Ground Clips (1/2)
b
2
3
Use a knife to cut the rubber jacket of
the elliptic waveguide, and use needle-
nose pliers to remove the rubber jacket.
51 mm
( 2 in )
Use sandpaper to rub off the adhesive on
the copper surface.
Install ground clips onto the elliptic waveguide.
a. Route a ground clip through a ground
clip hole.
Ground clip
hole
Ground
clip
Breaking line
b. Break off the excess part of
the ground clip along the
breaking line.
c. Roll the ground clip using the
matching rolling stick to secure
the ground clip.
Rolling
stick
Waterproof the ground clips.
a. Use the PVC tape to
wrap the ground cable
connector.
4
•The bending radius of the ground cable cannot be
less than 203 mm ( 8 in ).
45
