Huawei OptiX RTN 600 Product Description Download Page 16

Page: 16 / 50

OptiX RTN 600

Product Description

Commercial in Confidence

Page 10 of 44

Table 3-1

Functional modules

Functional

Module

Corresponding

Component

Function Description

Service interface
unit

SL1, SD1, SLE, SDE,
PH1, PO1

Accesses E1/STM-1o/STM-1e signals.

Cross-connect
unit

PXC (XC)

Cross-connects and grooms services.

Supports 1+1 standby.

IF unit

IF1A (IF), IF1B (IF)

Converts signals between baseband service
signals and IF analog signals.

Supports hitless switching for 1+1 configuration.

Supports FEC.

Supports ATPC.

Control unit

SCC (SCC)

System communications and control.

System configuration and management.

Collects alarms and monitors performance.

Clock unit

PXC (CLK)

Traces the clock source signal and provides
various clock signals for the system.

Auxiliary
interface unit

SCC (EOW)

Provides the orderwire interface.

Provides the asynchronous data interface.

Provides the external alarm input/output
interface.

Fan and power
unit

PXC (PWR), SCC
(PWR), IF1A (PWR),
IF1B (PWR), FAN

Provides -48 V/+3.3 V power for the IDU.

Supports the backup function of the input power
supply and the internal power supply.

Provides -48 V power for the ODU.

Provides fans for the system.

ODU

Converts signals between IF signals and RF
analog signals.

Provides the O&M channel to the IDU.

3.2 Hardware Structure

The OptiX RTN 600 hardware consists of IDU and ODU. The ODU is connected to the

IDU through a coaxial cable. The cable is used to transmit IF signals, O&M signals,

and -48 V DC power.

3.2.1 IDU

The IDU is the indoor unit of an OptiX RTN 600 system. It accesses services, and

performs multiplexing/demultiplexing and IF processing of the services.

The IDU is designed with slots. You can install different types of boards into the slots

to realize different functions.

Summary of Contents for OptiX RTN 600



















































Search results

Summary of Contents for OptiX RTN 600

Reviews:

Related manuals for OptiX RTN 600

Brands by name

Popular brands

Huawei OptiX RTN 600, Product Description

Search results

Summary of Contents for OptiX RTN 600

Reviews:

Related manuals for OptiX RTN 600

Brands by name

Popular brands