Installation Reference
Optional: Installing an OAU 2F on a Pole
Optional: Installing an OAU 2F on a Wall
Pass the hose clamps through the pole mounting bracket and fix the hose clamps on a pole using
the screws of the hose clamps.
Fasten the OAU 2F box, which has a conversion bracket, on the
pole mounting bracket using screws. Then, turn the box gently (in
both the horizontal and vertical directions) to check whether the box
is securely installed.
Press the pole mounting bracket against a wall, level the installation location using
a level, and mark locating points using a marker.
Pole mounting
bracket
Drill holes and install expansion bolts in the locating points.
Install the pole mounting bracket onto the expansion bolts, place a flat
washer, a spring washer, and a nut on each expansion bolt, and then
tighten the nuts.
Locating point
Fasten the OAU 2F box, which has a conversion bracket, on
the pole mounting bracket using screws. Then, turn the box
gently (in both the horizontal and vertical directions) to check
whether the box is securely installed.
Fasten the extra portion of the hose clamps onto
the pole using outdoor binding straps.
1
2
3
1
2
3
4
11
M6x60 bolt
Nut
Spring washer
Flat washer
Expansion sleeve
45 mm to 50 mm
a
b
c
Ensure that each expansion bolt protrudes from the wall for 8 mm to 12 mm.
