Huawei ME909u-523 Application Manual Download Page 94

Page: 94 / 104

HUAWEI ME909u-523 LTE LGA Module
Application Guide

FOTA Application Scenarios

Issue 04 (2014-12-08)

Huawei Proprietary and Confidential

^FOTASTATE: 10

Indicate that the FOTA state is idle.

AT^FOTADET

Check for updates after deleting the
new version on the server.

^FOTASTATE: 11

^FOTASTATE: 14

Report that no new version is found.

NOTE



Version detection is allowed only if the FOTA state is idle.



If the module is undergoing the PS data service or IPSTACK service, the FOTA service
cannot be initiated, including version detection, download, and upgrade.



The parameter

<description>

of the ^FOTASTATE command is a string composed of

ASCII characters. This parameter is used to describe the changed items (corresponding to
the feature items in

changelog.xml

in the upgrade package) of the new version. The

parameter contains a maximum of five records, each containing up to 255 characters.
Records are separated by semicolon.

15.4.2

Troubleshooting

Scenario

Possible Error
Information

Solution

An error message is
returned.

+CME ERROR: FOTA is
in collision state

Check whether the PS data
service or IPSTACK service
is going on, or use

AT^FOTASTATE?

command to check whether
the FOTA state is idle.

An error message is
returned.

+CME ERROR: Previous
command is not
complete

Wait for the previous
command to be completely
executed.

An error message is
returned.

+CME ERROR: SIM PIN
required

Use the PIN to unlock the
SIM card.

The module reports a
query failure.

^FOTASTATE:
13,<error_code>

Upon a query failure, the
module restores the FOTA
state to idle and deletes the
downloaded files. For error
codes, see the latest
version of

HUAWEI

ME909u-523 LTE LGA
Module AT Command
Interface Specification

Summary of Contents for ME909u-523









































































































Search results

Summary of Contents for ME909u-523

Reviews:

Related manuals for ME909u-523

Brands by name

Popular brands

Huawei ME909u-523, Application Manual

Search results

Summary of Contents for ME909u-523

Reviews:

Related manuals for ME909u-523

Brands by name

Popular brands