NFC
Use NFC to send data
: Open
Settings
, touch
Device connection
and enable
NFC
and
Huawei Beam
. Select the files you want to send and touch
Share
>
Huawei Beam
to enable
NFC. Keep your phone unlock and light on. Place the NFC detection areas of both devices close
together. Once a connection is established, the sending device will play an audio prompt and the
sharing screen will minimize. Touch the sending device's screen to begin sending files.
Accepting files over NFC
: Open
Settings
, touch
Device connection
and enable
NFC
and
Huawei Beam
. Keep your phone unlock and light on. Place the NFC detection areas of both
devices together. Once a connection is established, the sending device will play an audio
prompt. Wait for the file transfer to complete. Received files are saved to the
beam
folder in
Files
by default.
If there is a
Read and write/P2P
switch on the NFC screen, ensure it is also
enabled.Features may vary depending on your carrier.
Use NFC to Connect Devices Quickly
Place the NFC detection areas of two devices close together to quickly establish a Bluetooth or
Wi-Fi connection between them. You can also use this method to establish a Wi-Fi Direct
connection or share a Wi-Fi hotspot without entering connection details manually.
Device Connection
106
Summary of Contents for Mate10 Pro
Page 1: ...User Guide ...