IDS2000 Dual-Row Aisle Containment
Installation Guide (Split-type Skylight, Old-Version
Sliding Door)
3 Installation Scenarios in Dual Row Aisle Containment
Issue 02 (2015-06-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
71
Secure the stop block of the closer to the required position using a flat-head screwdriver based on
the door opening angle, as shown by 2 in
Tighten the screws to ensure that the stop block works properly, as shown by 3 in
Step 4
Adjust the door opening angle and door closing speed based on actual requirements. In
, the left figure is the top view of the door when it is opened to the left by 90 degrees, and
the right figure shows two openness ranges in which the door rotation speed can be adjusted.
Figure 3-53
Door closer top view
(1) Guide
rail
(2) Tuning screw for openness range
b
(3) Tuning screw for openness range
a
(4) Left door (5) Arm
1.
Open the door by 120 degrees, as shown in
It is recommended that the maximum door openness be set to 120 degrees.
2.
Use a flat-head screwdriver to adjust the tuning screw for openness range b by tightening
it slightly along the "+" direction until the arm can move back to the position around 45
degrees.
The screw can only be adjusted slightly. Otherwise, the closer with fail to work due to oil
leakage.
3.
Use a flat-head screwdriver to adjust the tuning screw for openness range a by tightening
it slightly along the "+" direction, until the arm can swiftly move back to the original
position.
