9
PSU sockets
-
-
Port Description
Table 5-4 Ports on the rear panel
Port
Type
Quantity
Description
10GE optical
port
10GE SFP+
2
10GE LOM service ports
(optical).
GE electrical
port
1000BASE-T
2
GE LOM service ports
(electrical).
VGA port
DB15
1
Used to connect a display
terminal, such as a monitor or
KVM.
Serial port
RJ45
1
Default operating system
serial port used for debugging.
You can also set it as the iBMC
serial port by using the iBMC
command.
NOTE
The port uses 3-wire serial
communication interface, and the
default baud rate is 115,200 bit/s.
Management
network port
1000BASE-T
1
Used for server management.
NOTE
The management network port is
a GE port that supports 100
Mbit/s and 1000 Mbit/s auto-
negotiation.
USB port
USB 3.0
2
Used to connect to a USB
device.
NOTICE
Before connecting an external
USB device, check that the USB
device functions properly. The
server may operate abnormally if
an abnormal USB device is
connected.
Huawei FusionServer Pro 2488H V5 Server
Technical White Paper
5 Hardware Description
Issue 03 (2020-04-20)
Copyright © Huawei Technologies Co., Ltd.
20