20
Connecting VCN or IVS1800 Cables
5.2
Connecting a Cable to the
WLDS900 Water Sensor
5.3
1. Connect one end of the network cable
that has been routed to the water
detector to the AIDI_2 port on the
ECC800-Pro.
1. Connect the OUT port on the T/H sensor on
the front door to the RS485-IN port on the
T/H sensor on the rear door in series.
Connecting T/H Sensor
Cables
5.4
(1) Ground terminal
(2) GE1 port
(3) GE2 port
(4) Power button
(5) Power port
1. Connect one end of the ground cable to the grounding terminal of the device and the other
end to the grounding point of the network cabinet.
2. Connect one end of the network cable to any GE network port on the VCN510 or IVS1800.
3. Connect one end of the power cable to the power input port on the power module and the
other end to the PDU2000 in the cabinet.
VCN510
IVS1800
