Figure 8-2 Installing battery modules
(1) Full-capacity cabinet configuration
(2) Half-capacity cabinet configuration
NO TE
This section uses full-capacity cabinet configuration as an example to describe how to
install battery modules. The actual configuration prevails.
Step 4 Remove the front covers from battery modules, and install battery baffle plates.
Figure 8-3 Installing battery baffle plates
NO TE
Place the front covers properly to prevent the light pipes from falling off.
FusionDC1000A Prefabricated All-in-One Data
Center
Installation Guide (IT Scenario)
8 Installing Devices Inside the Pre-fab. Module
Issue 01 (2021-04-20)
Copyright © Huawei Technologies Co., Ltd.
70