1
1
Product Overview
Materials
Delivered with
the Equipment
Cord end terminal (10 mm
2
) for the indoor unit power cable, OT ground
terminal (10 mm
2
) for the indoor unit power cable, cable tie, hexagon bolt
assembly (M12x45), and four M6x16 bolts
Engineering
Purchasing
Drainpipe
G 1/2 inch outer screw thread
Water inlet/outlet pipe
DN50 seamless steel pipe with a G 2 inch external
threaded connector
Water inlet pipe for the
wet film humidifier
G 1/2 inch outer screw thread
Cables
Active power cable (4 x 10 mm
2
), standby power
cable (4 x 10 mm
2
), teamwork networking and
monitoring cables, and equipotential cable (6 mm
2
outdoor copper cable)
Others
Hoop iron, pipe support, thermal insulation foam,
dedicated glue for thermal insulation foam, and
thread sealant
2
Engineering Materials
Product Model
Pipe Routing
Cable Routing
Dimensions Without Packing (H
x W x D) (mm)
FusionCol8000-C210
Routed from top
Routed from top
2450 x 2350 x 1100
3
Installing the Equipment
1. Read the related user manual or instructions before installing the FusionCol8000-C.
2. The unit in this document is a fully configured FusionCol8000-C. If some components are not
configured, skip the corresponding steps.
3. You are recommended to use tools that are fully insulated when installing devices.
4. Only engineers from the manufacturer or engineers certified by the agent are allowed to
install, commission, and maintain smart cooling products. Otherwise, personal injuries and
device damage may be caused, which is beyond the warranty range.
Copyright © Huawei Technologies Co., Ltd. 2022.
All rights reserved.
