12
Checking the Signal Strength
1.
After installing the antenna, press and hold
to power the FWT on. Wait until the
signal strength icon
appears or the dialing tone is heard when you lift the handset.
2.
If
does not appear after five minutes or you hear the failure tone when you lift the
handset, it indicates that the FWT is not receiving signals. In this case, adjust the
antenna direction until you can hear the dialing tone when lifting the handset.
3.
If there is no signals even after you adjust the antenna in 360 degrees angle, it indicates
that the signal is weak in the particular site. Either change the site or contact the service
provider.
Placing the FWT
You can place the FWT horizontally or vertically.
Horizontally
Place the FWT on a flat surface. Select a cool and ventilated site for the FWT to dissipate
the heat.
Vertically
1.
Pull out the handset-retaining clip from the slot and turn it around. Then push it back so
that the handset does not drop when FWT is placed vertically.
