HUAWEI
31
5
Quick Start
Do as follows, you can manage how to answer and make a call through the FWT
in a short time.
1
As shown in Figure 3-4, insert one end of the spiral cord into the jack at the
end of the handset and the other end into the jack on the main unit.
2
Install the power adapter or the battery. For the details, refer to the “
4 Installation Description”.
3
Turn on the FWT and wait a few seconds for the FWT searching and
registering in the network until indicators such as time and signal appear.
Adjust the antenna to ensure fine signal strength.
4
Pick up the handset and input a call number after hearing the dialing tone.
Pressing <
CALL/REDIAL
>, you can dial out the number.
5
When there is a call incoming and the FWT is in standby state, you can pick
up the handset or press <
HANDFREE
> or <
CALL/REDIAL
> to answer the
call.
6
You can set the time for auto dialing. By default, it is seven seconds. Perform
the following steps for this function:
y
Press <
MENU
> to access the function menu.
y
Press the <
UP/DOWN
> scroll key to select <
Settings
>.
y
Press the <
UP/DOWN
> scroll key to select <
Personal
>.
y
Press the <
UP/DOWN
> scroll key to select <
Auto-dial Time
>.
Note:
<
Auto-dial Time
> means that the phone number you keyed in is dialed
automatically at the time you set without pressing the <
CALL
> key. If
the time you set for auto dialing is too short, an incomplete number may
be dialed before you key in the whole number.
