eSpace IAD208E(M) Integrated Access Device
Quick Start
4
Manual Configuration (Web)
Issue 04 (2012-06-11)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
21
Choose
MGCP Service Configuration
>
MG
to access the MG configuration
page to view the user registration status. If the
Registered
state is displayed, it
indicates that the corresponding phone is registered successfully.
You can verify calls. If calls can be performed or received successfully, it indicates
that the data is configured correctly.
If a fault occurs, you need to check whether the data is correctly configured. If the fault
persists, see Troubleshooting to locate the fault.
4.4 IAD (SIP) Connecting to the IMS
Users of the IAD208E(M) register with the IMS to implement the voice service. After
configuring data in the IMS, configure data on the IAD208E(M) to implement the
voice service.
Data Preparation
Obtain the following data from the administrator before configuring the data.
Item
Example
IP address of the
IAD208E(M)
IP address: 192.169.1.62
Subnet mask: 255.255.255.0
Gateway IP address: 192.169.1.1
IP address of the SIP server
IP address: 192.169.1.40
User domain name
abc.def.com
SIP user(The SIP user
belongs to the wild group
whose IMPU is
+8657143210000 on the
IMS)
user ID: +86571402001
user name: [email protected]
password: 123456
Group User
IMPU: +8657143210000
IMPI: [email protected]
password: 654321
Procedure
Step 1
View the current protocol mode. Choose
Advanced Configuration
>
Protocol Mode
.
The protocol mode setting page is displayed.
