eSpace IAD104H
Quick Start
6
FAQs
Issue 10 (2019-04-09)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
45
A: Log in to the CLI, and run the
enable
and
configure
terminal
commands in sequence to enter the global
configuration mode. Then run the
display elabel
command.
11.
Q: How do I view the software version of the IAD?
A: Log in to the CLI, and run the
enable
and
configure
terminal
commands in sequence to enter the global
configuration mode. Then run the
display version
command.
12.
Q: How do I change the protocol?
−
A: To change to the SIP mode, log in to the CLI, run
the
enable
and
configure terminal
commands in
sequence to enter the global configuration mode, and
run the
protocol-mode sip
command.
−
To change to the MGCP mode, log in to the CLI, run
the
enable
and
configure terminal
commands in
sequence to enter the global configuration mode, and
run the
protocol-mode mgcp
command.
13.
Q: How do I view the system information?
A: For details, see
Maintenance
>
Viewing the System
Information
in the
eSpace IAD Product Documentation
.
14.
Q: How do I set the VLAN priority on the IAD?
A: For details, see Configuring the VLAN in the
eSpace
IAD Product Documentation
.
15.
Q: How do I set the fax function on the IAD?
A: For details, see Configuration in the
eSpace IAD
Product Documentation
.
16.
Q: How do I enable the pulse dialing function?
A: Log in to the CLI, and run the
enable
,
configure
terminal
, and
advanced
commands to enter the advanced
mode. Then run the
pstnport attribute set 0 enable
command. If port 0 needs to be connected to the DTMF
phone, run the
pstnport attribute set 0 disable
command
to disable the pulse dialing function.
