Huawei IP Phone eSpace 6810
User Manual
4 Configuring the eSpace 6810
Issue 01 (2011-12-07)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
12
Menu
Configuration Description
LEFT
or
RIGHT
to turn up or turn down the volume.
[LCD Contrast]Choose this menu and Press
LEFT
or
RIGHT
to set
the LCD screen contrast.
[LCD Brightness]Press
LEFT
or
RIGHT
to set the LCD brightness
of the IP phone in active and idle states. The value ranges from 0 to
8.
[Download SCR XML]Send a request to the HTTP/TFTP server for
downloading a screen saver to replace the original one. For details
on how to configure this service, see the
Huawei IP Phone eSpace
6805&6810&6830&6850&6870 Administrator Guide
or contact the
administrator.
[Erase Custom SCR]Restore the factory setting for the standby
image.
[Display Language]Choose this menu to select the language.
[Time Settings]Set the date and time of the IP phone.
Press
LEFT
or select
Back
to return to the main menu.
Config
Display the configuration submenus.
[SIP]Set the SIP server for each account, including
Account
,
SIP
proxy
,
Outbound proxy
,
SIP user ID
,
SIP Auth ID
,
SIP
password
,
SIP transport
, and
Audio CODECs
.
[Upgrade]Configure the firmware server and the file download
server. Select either TFTP or HTTP to upgrade the firmware or
configure the phone.
[Factory Reset]Type the MAC address on back of the phone. Press
OK softkey to restore the factory reset settings. Factory reset clears
all configurations and restores the phone to factory settings.
[Layer 2 QoS]
Configure the 802.1Q VLAN tag and 802.1P priority.
Press
LEFT
or select
Back
to return to the main menu.
Factory
Functions
These items are used for factory testing and not recommended for users.
[Audio Loopback]Speak to the handset. If you hear your voice in
the handset, your audio works well. Press
MENU
to exit the mode.
[Diagnostic Mode]All LEDs are on. Press any key on the keypad to
display the key name on the LCD. Pick up the handset or press
MENU
to exit the diagnostic mode.
Press
LEFT
or select
Back
to return to the main menu.
Network
Enable or disable the DHCP protocol. Set the IP address, subnet mask,
and gateway address by using the keypad if the static IP mode is
selected.
Reboot
Reboot the device.
Exit
Exit the menu.
