Huawei EG860 Series, User Manual

Page: 81 / 124

Table 5-8 Examples for static route configuration
Parameter Parameter Value Description
Destination IP 155.1.1.111 IP address of the video
server
Subnet Mask 255.255.255.255 The subnet mask
255.255.255.255
indicates that the
destination of routes is
only one host.
Gateway IP 43.0.1.2 IP address of tunnel 2 on
the EG860 side
l L2TP
1. Choose General Settings > L2TP Settings . The L2TP interface is displayed.
2. On the L2TP Config interface, set related parameters.
3. Click Commit .
Table 5-9 Example for L2TP configuration
Parameter Parameter Value Description
L2TP Tunnel Enable If this parameter is set to
Enable , the L2TP
transmission mode is
enabled.
Peer Ip Addr 155.1.1.200 IP address of the router
User admin Authentication user name
of the
L2TP tunnel
transmission mode. The
user name must be the
same as that configured
on the router.
Password TD4GCPE Authentication password
of the
L2TP tunnel
transmission mode. The
password must be the
same as that configured
on the router.
Add to bridge Enable If this parameter is set to
Enable , a BCP interface
is added to the bridge to
implement ETH over PPP
over L2TPv2.
EG860
User Guide
5 Configuration
Issue 02 (2015-04-10) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
72