minimum power required to reach the
network.
All models of Huawei’s wireless device are
designed to meet radio frequency exposure
guidelines such as European Council
Recommendation and Federal
Communications Commission Notice (United
States).
European Council Recommendation
:
Before a wireless device model is available
for sale to the public, it must be tested
according to the technical standard-EN 50361
and not exceed the limit established by the
European Council Recommendation:
1999/519/EC for safe exposure.
The SAR limit adopted by the 1999/519/EC is
2.0 watts/kilogram (W/kg) averaged over ten
gram of tissue. The highest SAR value for this
device type when tested is 0.927 W/kg.
[EN 50361 scope states “This basic standard
applies to any electromagnetic field (EM)
transmitting devices intended to be used with
the radiating part of the equipment in close
proximity to the human ear including mobile
phones, cordless phones, etc. The frequency
range is 300 MHz to 3 GHz. Therefore, the
above text does not address primary use of the
wireless device product.]
Federal Communications Commission
Notice (United States)
: Before a wireless
device model is available for sale to the public,
it must be tested and certified to the FCC that
it does not exceed the limit established by the
government-adopted requirement for safe
exposure.
The SAR limit adopted by the USA and
Canada is 1.6 watts/kilogram (W/kg) averaged
over one gram of tissue. The highest SAR
value reported to the FCC and IC for this
device type when tested for use is 1.28 W/kg.
[There is no reference to the specific reference
standard or its applicability to the intended use
of the product]
FCC Statement
This equipment has been tested and found to
comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide
reasonable protection against harmful
interference in a residential installation. This
equipment generates, uses and can radiate
radio frequency energy and, if not installed
and used in accordance with the instructions,
may cause harmful interference to radio
communications. However, there is no
guarantee that interference will not occur in a
particular installation. If this equipment does
cause harmful interference to radio or
television reception, which can be determined
by turning the equipment off and on, the user
is encouraged to try to correct the interference
by one or more of the following measures:
7
