3 Service Configuration
EchoLife HG850
Service Manual
3-10
Huawei Technologies Proprietary
Issue 02 (2007-05-30)
z
HW authentication mode is a private authentication procedure of Huawei. GB
authentication mode is defined by Ministry of Information Industry.
z
When the encryption algorithm of the SoftX3000 is MD5, you need to configure the
authentication mode of the interconnected HG850 to the HW mode. When the encryption
algorithm of the SoftX3000 is DH, you need to configure the authentication mode of the
interconnected HG850 to the GB mode.
Example:
Configure the HG850 to register to the call server in the HW mode. The registration key
configured on the server is HG850register.
Step
Operation
1
Configure the authentication mode to HW as well as the authentication key:
TERMINAL(config)#
mgcp authentication hw-mode key
Please input your keyword<1~16 characters>:*************
Please input again:*************
2
Query the configuration result:
TERMINAL(config)#
display mgcp attribute
===============================================
MGIP MG-PORT MG-DOMAIN-NAME
191.168.208.13 2427 -
===============================================
MGC-IP1 MGC-PORT1 MGC-DOMAIN-NAME1
0.0.0.0 2727 -
===============================================
MGC-IP2 MGC-PORT2 MGC-DOMAIN-NAME2
0.0.0.0 2727 -
===============================================
MG-STATE REGISTERED-MGC
Fault 1
===============================================
AUTH-MODE KEY
Huawei mode *******
Configuring Signaling Port Number of MG
By default, the protocol port number of the transport layer of the MG device is
2427
. To
change it, execute the following command.
Command
Remarks
TERMINAL(config)#
mgcp mg-port
port
Port
: Port number. By default, it
is
2427
.
